Sistema de Bibliotecas Universidad de América | SISTEMA DE BIBLIOTECAS

ACERCA DE NOSOTROS

Standard test method for sulfur in petroleum and petroleum products by energy dispersive X-ray fluorescence spectrometry / ASTM International

By: American Society for Testing and Materials [autor]Publisher: [Lugar de publicación no identificado] West Conshohocken 2016Description: 9 páginas páginas tablas 30 cmSubject(s): Analisis espectral | Azufre | Combustibles | Petroleo -- DerivadosDDC classification: 665.5
Contents:
Designation: D4294 - 16
Scope. - - Refererenced documents. - - Terminology. - - Summary of test method. - - Apparatus. - - Temperature of test. - - Significance and use. - - Interferences. - - Apparatus. - - Reagents. - - Sample Cell Preparation. - - Calibration. - - Preparation of apparatus. - - Sampling. - - Procedure. - - Calculation. - - Report. - - Quality control. - - Precision and Bias. - - Keywords
Summary: This test method covers the determination of total sulfur in petroleum products that are single-phase and either liquid at ambient conditions, liquefiable with moderate heat, or soluble in hydrocarbon solvents. These materials can include diesel fuel, jet fuel, kerosine, other distillate oil, naphtha, residual oil, lubricating base oil, hydraulic oil, crude oil, unleaded gasoline, gasoline-ethanol blends, biodiesel (see Note 2), and similar petroleum products. This standard is issued under the fixed designation D4294; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parenthesis indicates the year of last reapproval. A superscript epsilon (e) indicates and editorial change since the last revision or reapproval. The standard has been approved for use by agencies of the U.S. Department of defense.
List(s) this item appears in: Ingeniería de Petróleos
Tags from this library: No tags from this library for this title. Log in to add tags.
    Average rating: 0.0 (0 votes)
Item type Current location Collection Call number Vol info Copy number Status Date due Barcode Item holds
Book Book B. Campus los Cerros
Colección general
Colección general 665.5 A512s1 (Browse shelf) 2016 1 Available 0000055102
Total holds: 0

Include appendixes. -- Appendix A. Additional diesel precision statements. -- B. Additional gasoline precision statements. -- C. Handling oxygenated fuels.

Include bibliographic references.

Designation: D4294 - 16

Scope. - - Refererenced documents. - - Terminology. - - Summary of test method. - - Apparatus. - - Temperature of test. - - Significance and use. - - Interferences. - - Apparatus. - - Reagents. - - Sample Cell Preparation. - - Calibration. - - Preparation of apparatus. - - Sampling. - - Procedure. - - Calculation. - - Report. - - Quality control. - - Precision and Bias. - - Keywords

This test method covers the determination of total sulfur in petroleum products that are single-phase and either liquid at ambient conditions, liquefiable with moderate heat, or soluble in hydrocarbon solvents. These materials can include diesel fuel, jet fuel, kerosine, other distillate oil, naphtha, residual oil, lubricating base oil, hydraulic oil, crude oil, unleaded gasoline, gasoline-ethanol blends, biodiesel (see Note 2), and similar petroleum products. This standard is issued under the fixed designation D4294; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parenthesis indicates the year of last reapproval. A superscript epsilon (e) indicates and editorial change since the last revision or reapproval. The standard has been approved for use by agencies of the U.S. Department of defense.

There are no comments on this title.

to post a comment.

Powered by Koha