Sistema de Bibliotecas Universidad de América | SISTEMA DE BIBLIOTECAS

ACERCA DE NOSOTROS

Standard test method for water and sediment in crude oil by the centrifuge method (laboratory procedure) / American Society for Testing and Materials; American Petroleum Institute

By: American Society for Testing and MaterialsPublisher: [Lugar de publicación no identificado] ASTM International [fecha de publicación no identificada]Description: 13 páginas páginas ilustraciones figuras, tablas 30 cmOther title: Manual of Petroleoum Messurement Standards (MPMS), Chapter 10.3Contained works: American Petroleum InstituteSubject(s): Bombas centrifugas | Manuales de laboratorio | Petróleo crudoDDC classification: 665.5072
Contents:
Designation: D4007 - 11 (Reapproved 2016).
Scope. - - Referenced documents. - - Summary of test method. - - Significance and use. - - Apparatus. - - Solvent. - - Sampling. - - Procedure. - - Calculation. - - Precision and Bias. - - Keywords.
Summary: This standard is issued under the fixed designation D4007; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parenthesis indicates the year of last reapproval. A superscript epsilon (e) indicates and editorial change since the last revision or reapproval. This test method covers the laboratory determination of water and sediment in crude oils by means of the centrifuge procedure. This centifuge method for determinig water and cedimet in crude oils is not entirely satisfactory. The amount of water detected is almost always lower than the actual water content. When a highly accurate value is required, the revised procedures for water by destillation. Test method D4006 (API MPMS Chapter 10.2) (Note 1), and sediment by extraction, test method D473 (API MPMS Chapter 10.1), shall be used.
List(s) this item appears in: Ingeniería de Petróleos
Tags from this library: No tags from this library for this title. Log in to add tags.
    Average rating: 0.0 (0 votes)
Item type Current location Collection Call number Vol info Copy number Status Date due Barcode Item holds
Book Book B. Campus los Cerros
Colección general
Colección general 665.5072 A512 (Browse shelf) 2016 1 Available 0000055099
Total holds: 0

Include annex and appendix. - - Annex A. Procedure to water-saturatae toluene. - - Appendix X1. Precision and accuary of methods for determining water in crude oils.

Include bibliographic references.

Designation: D4007 - 11 (Reapproved 2016).

Scope. - - Referenced documents. - - Summary of test method. - - Significance and use. - - Apparatus. - - Solvent. - - Sampling. - - Procedure. - - Calculation. - - Precision and Bias. - - Keywords.

This standard is issued under the fixed designation D4007; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parenthesis indicates the year of last reapproval. A superscript epsilon (e) indicates and editorial change since the last revision or reapproval. This test method covers the laboratory determination of water and sediment in crude oils by means of the centrifuge procedure. This centifuge method for determinig water and cedimet in crude oils is not entirely satisfactory. The amount of water detected is almost always lower than the actual water content. When a highly accurate value is required, the revised procedures for water by destillation. Test method D4006 (API MPMS Chapter 10.2) (Note 1), and sediment by extraction, test method D473 (API MPMS Chapter 10.1), shall be used.

There are no comments on this title.

to post a comment.

Powered by Koha